BHMGB - X 500 SLOW SAFETY SOL. REDUCER
- MSDS: BHMGB
- Manufacturer: MIDLAND DIV THE DEXTER CORP
- Product Name: X 500 SLOW SAFETY SOL. REDUCER
- National Stock Number: 8010-00-161-6797
Product Identification
Product ID:X 500 SLOW SAFETY SOL. REDUCER
MSDS Date:01/24/1990
FSC:8010
NIIN:00-161-6797
MSDS Number: BHMGB
Responsible Party
HAYWARD, CA 94544
US
Emergency Phone: 415-471-7171 NIGHT 415-796-4972
Info Phone: 415-471-7171 NIGHT 415-796-4972
Preparer: D ELLISON
Cage: 98795
Contractor
Telephone: 510-471-7171
Cage: 98795
Ingredients
ETHYL BENZENE (SARA III)
CAS: 100-41-4
RTECS: DA0700000
Fraction By Weight: 10-20%
OSHA PEL 100 PPM/125 STEL
ACGIH TLV: 100 PPM/125STEL 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: <10%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PM ACETATE
CAS: 108-65-6
RTECS: AI8925000
Fraction By Weight: 80-90%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:OVEREXPOSURE BY INHALATION MAY CAUSE
IRRITATION OF THE RESPIRATORY TRACT, HEAD ACHES, DIZZINESS, OR
DROWSINESS
MATERIALS MAY AFFECT THE FOLLOWING ORGAN S: KIDNEYS, RESPIRATORY
TRACT, & LIVER.
Effects of Overexposure:SKIN/EYE: IRRITANT TO THE EYES AND SKIN
Medical Cond Aggravated by Exposure:NONE
First Aid
First Aid:EYE: FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF RUNNING WATER
FOR 15 MINUTES. SKIN: REMOVE CONTAMINATED CLOTHING AND WASH
SKIN WITH SOAP AND WATER INHAL: REMOVE TO FRESH
AIRINGST: DRINK W ATER
IF NECESSARY CONSULT A PHYSICIAN FOR ANY OF THESE
CONDITIONS
Fire Fighting
Flash Point Method:SCC
Flash Point:92F/33C
Lower Limits:1.00
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL, OR CARBON
DIOXIDE.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS, VENTILATE AREA, AND REMOVE WITH INERT
ABSORBANT AND NON SPARKING TOOLS.
Handling
Handling and Storage Precautions:CONTAINERS SHOULD BE GROUNDED WHEN
POURING.AVOID FREE FALL OF LIQUID IN EXCESS OF A FEW INCHES. DO
NOT CUT,BRAZE,OR WELD W/O NIOSH APPVD RESPIRATOR.
Other Precautions:DO NOT TAKE INTERNALLY. MAKE SURE THE DRUM IS
COMPLETELY EMPTY BEFORE ATTEMPTINGTO WELD OR BRAZE. THE DRUM SHOULD
BE INDUSTRIALLY CLEANED PRIOR TO REUSE.
Exposure Controls
Respiratory Protection:WHERE GENERAL/LOCAL EXHAUST FAILS TO ADEQUATELY
DILUTE TWA/PER OF THE MATERIAL THEN USE NIOSH/MSHA APPROVED AIR
LINE TYPE RESPIRATORS OR HOODS FOR ENCLOSED ANDCONFINED AREAS. AIR
PURIFYING RESPIRATOR S MAY BE USED FOR OTHER AREAS.
Ventilation:PROVIDE GENERAL DILUTION/LOCAL EXHAUST VENTILATION TO KEEP
TWA/LEL BELOW ACCEPTABLE LIMITS & TO REMOVE DECOMP PRODUCTS.
Protective Gloves:CHEMICAL RESISTANT GLOVES
Eye Protection:SAFETY GLASSES TO PROTECT FROM SPLASHING
Supplemental Safety and Health
NK
Chemical Properties
Boiling Pt:B.P. Text:277-302F
Vapor Density:>AIR
Stability
Stability Indicator/Materials to Avoid:YES
NK
Hazardous Decomposition Products:FUMES MAY CONTAIN CARBON MONOXIDE &
OXIDES OF NITROGEN. MAY PRODUCE HAZ FUMES W/HEATED TO DECOMPOSITION
AS IN WELDING
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL,STATE, AND
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.